LX400+ UV LED Spot Curing System Controller

Using the latest UV LED technology, the OmniCure® LX400+ spot curing system offers ultimate control and repeatability to save costs on assembly manufacturing processes, while ensuring consistent reliability and highest product quality. Also found in the OmniCure® LX400+ UV LED curing system, is our patented Intelli-Lamp® technology allowing users a greater degree of process assurance through real time UV LED temperature monitoring.

The LX400+ offers the ability to control up to four UV LED spot curing heads simultaneously or independently at different wavelengths: 365nm, 385nm and 400nm. The availability of different wavelengths addresses the requirements of a wide range of UV cured bonding adhesives.

NEW Features:

UV LED Spot Curing Head Temperature on Display

Two Additional Foot Pedal Channel Control Configurations: FP5 and FP6
- Sequential Exposure of Channels 1, 2, 3, and 4

OmniCure®'s patented Intelli-Lamp® technology monitors the temperature and operating hours of the UV LED spot curing heads to optimize a lifetime guarantee of 10,000 hours of operation or three years, whichever comes first.

» Features & Benefits
» Specifications
» LX400 vs LX400+
» Energy Savings

OmniCure® LX400+ Features	Benefits
Sequential Exposure of Channels 1, 2, 3, and 4 with the New Channel Configuration Mode FP6 NEW!	Customized multi-phase curing processes directly from the LX400+ controller, without using an external control unit.
Uses the Latest UV LED Technology for Maximum Irradiance at Different Wavelengths: 9,500mW/cm² at 365nm 12,400mW/cm² at 385nm 9,000mW/cm² at 400nm	Reduction in UV assembly manufacturing costs with faster curing time and higher power efficiency while supporting a wide range of UV cured adhesives.
Precisely controls the UV Light Exposure Time (+/- 0.1 second) and Intensity Level (+/- 1%) of up to four Different UV LED Heads	Consistent repeatability in UV curing assembly manufacturing processes for highest product quality.
Highly Efficient and Intelligent UV LED Spot Curing Heads with Extra Cooling Capability and patented Intelli-Lamp® Technology	Maximum UV LED head power efficiency, long term reliability and guaranteed lifetime.
High Energy Efficiency from using the latest LED Technology	Approximately 75% less energy consumption than a typical UV arc lamp curing system.
Controls up to 4 UV LED Spot Curing Heads simultaneously or independently using a single controller	Versatility in production setup for running up to 4 UV curing heads simultaneously or independently.
LED Head Temperature on Display NEW!	Optimum efficiency in UV curing manufacturing processes while extending UV LED head lifetime.
Autonomous and Robust UV Curing System with Compact Dimensions	Highest performance in dense and harsh manufacturing environments; no additional cooling required.
Certifications & Safety Standards	Compliance with CE and RoHS requirements.
User-friendly front panel control	Ease of use for quick system set-up in a matter of minutes.

General Specifications - OmniCure® LX400+ UV LED Spot Curing Controller
User Interface Description
Interchangeable UV LED Heads	1 to 4 individual heads
LED Indicators	Indicates Timer Control, Level, Trigger Mode and Emission (UV ON)
Mode Control	Mode and Up/Down buttons to control the display mode
Timer	Programmable trigger mode: Countdown Mode: Range programmable from 999.9s to 0.1s, in 0.1s intervals Count Up Mode: User control timing via the front panel or foot pedals
Level	15%-100% (with 1% increments)
Start/Stop	Control start or stop of the LED emission
Key Switch	Turn on/off controller
Flashing Alarm	Over temperature protection and lamp-off alarm for LED Heads
Foot Pedal	Control start or stop of the LED Emission
Controller Dimensions	W x L x H : 7.55” (191.77mm) x 6.6” (167.64mm) x 2.9” (73.66mm)

External PLC Control Description
Method	PLC (See the manual for more details)
External Input	Start/Stop, intensity level selection, lock out front panel interface and timer mode selection
External Output	Emission alarm

Operating Conditions
Operating Voltage	Controller Supply Input: 12 VDC Input to AC adaptor: 100-120VAC or 200-240VAC (+/-10%) & 50/60Hz.
Power Consumption	72W max at 120VAC 104W max at 240VAC (with 4 UV LED heads in operation)
Ambient Temperature/ Humidity Range	5° to 35°C, 85% max. (no condensation)
Storage Temperature/ Humidity Range	-10° to 60°C, 85% max. (no condensation)
Certifications & Safety Standards	RoHS compliant and meets CE requirements
Warranty	1 year

OmniCure® LX400 vs LX400+ Advanced UV LED Spot Curing Systems

OmniCure® LX400+ system includes three new functions compared to the previous LX400 version:

UV LED Head Temperature on Display NEW!

Displays UV LED head temperature during and between UV light exposures in real time. This results in optimum efficiency in UV curing manufacturing processes while extending UV LED head lifetime.

Two Additional Foot Pedal Channel Control Configurations: FP5 and FP6 NEW!

Channels 1 & 2 vs 3 & 4 simultaneously
In FP5 mode, foot pedal #1 controls channels 1 and 2 simultaneously and foot pedal #3 controls channels 3 and 4 simultaneously (see the Foot Pedal Channel Control Table below).
Sequential Exposure of Channels 1, 2, 3, and 4
In FP6 mode, foot pedal #1 sequentially exposes channels 1, 2, 3, and 4. This channel control configuration mode allows for customized multi-phase curing processes directly from the LX400+ controller, eliminating the need to use an external control unit to implement multi-phase curing processes.